Brooks Automation PRI-Equipe AXM Series - SERVICE

Call for a repair service quote. .

Brooks Automation PRI-Equipe AXM-100/200/300/400 Robot Refurbishment - Scope of Work

Refurbishment is recommended for robots over 5 years old.

PTB Sales will perform the following:

1. Incoming Inspection

• Attach Work Order to AXM Robot
• Picture taken of AXM Robot's Configuration/Condition

2. Complete teardown and disassembly

• Replace all wear components such as bearings
• Replace all Timing belts
• Replace vacuum switch and solenoid valves
• Replace A & B flex cables
• Replace wiring through Z-axis tube and arm link wiring.
• Replace vacuum tubing
• Replace servomotors R,T and Z
• Inspect, clean and lubricate ball screw-nut assembly replace as needed

3. Test

• Verify encoder / sensor functions
• Run EQT Diagnostics testing.
• Test function of circuit boards, replace as needed.
• Align all robot axes, verify Z orthogonality
• Set arm COP and retract position
• 48 hour Burn-in test for repeatability

4. Final Quality Control Check List

• Final Test Report attached to Robot
• Replace Service Label
• Protective covers installed on I/I connectors
• Package with accordance with DOT Standards
• Clean & bag for shipment
• Warranty (1 Year)

Brooks Automation PRI-Equipe AXM-100/200/300/400 Robot Enhanced Repair - Scope of Work

PTB Sales will perform the following:

1. Incoming Inspection

• Attach Work Order to AXM Robot
• Picture taken of AXM Robot's Configuration/Condition

2. Complete teardown and disassembly

• Replace any wear components such as bearings as needed
• Replace all Timing belts
• Replace vacuum switch and solenoid valves as needed (ATM/ABM)
• Inspect, clean and lubricate ball screw-nut assembly replace as needed

3. Test

• Test servo-motors current and encoder function replace as needed
• Verify encoder / sensor functions
• Run EQT Diagnostics testing.
• Test function of circuit boards and cable/wiring, replace as needed.
• Align all robot axes, verify Z orthogonality
• Set arm COP and retract position
• 48 hour Burn-in test for repeatability

4. Final Quality Control Check List

• Final Test Report attached to Robot
• Replace Service Label
• Protective covers installed on I/I connectors
• Package with accordance with DOT Standards
• Clean & bag for shipment
• Warranty (6 months)

This product has been refurbished by PTB Sales, Inc. PTB Sales is not affiliated with Brooks Automation, Inc., the Original Equipment Manufacturer. In some cases, PTB Sales uses processes and parts that are different from those used by the OEM, and the OEM expressly disclaims any warranty obligations with respect to this refurbished product.