Brooks Automation MagnaTran 7 - SERVICE

Call for a repair service quote.

Brooks Automation MagnaTran 7 Robot Refurbishment - Scope of Work

• Perform an incoming visual check for obvious shipping damage. If found contact customer representative immediately.
• Rebuild/replace T1-Axis, T2-Axis, Z-Axis motors.
• Rebuild Z-axis linear guide.
• Rebuild Z-axis lead nut.
• Inspect, test and replace T1 & T2 encoders/read heads as needed.
• Inspect, test and replace home sensors.
• Replace all bearings.
• Replace O-rings.
• Rebuild of bi-symmetric arm set.
• Axes encoder calibrations.
• Firmware will remain the same as incoming to retain configuration files.
• Perform vacuum leak testing.
• Dynamic repeatability testing of wafer cycling for 24 hours.

Refurbishment is recommended for robots over 5 years old.

This product has been refurbished by PTB Sales, Inc. PTB Sales is not affiliated with Brooks Automation, Inc., the Original Equipment Manufacturer. In some cases, PTB Sales uses processes and parts that are different from those used by the OEM, and the OEM expressly disclaims any warranty obligations with respect to this refurbished product.