Agilent IDP-3 - NEW
| Weight | 21 lbs |
|---|---|
| Pumping Speed | 3.0 m3/h |
| Ultimate Pressure | 3.3 x 10-1 mbar |
Agilent IDP-3 Dry Scroll Vacuum Pump - NEW
The Agilent IDP-3 dry scroll pump is an innovative, compact, high-performance, oil-free vacuum pump that is suitable for a wide variety of applications. It is the smallest scroll pump made for general vacuum applications, which makes it easy to integrate into OEM systems, and it weighs only 21 pounds (9.5 kg). Yet with a pumping speed of 60 l/m and a very low base pressure of 250 milliTorr, it is the highest-performing dry pump in its class.
- Oil-free - no contamination of the vacuum system
- Hermetic design with fully isolated motor and bearings
- Low noise and vibration
- No mechanisms subject to catastrophic failure
- Lower base pressure than diaphragm pumps
- Speed control on 24 VDC motor with 0-10V control signal
- Hour meter is standard on all IDP-3 units
Questions? Please call our toll free number at 866-332-0500 or send an email to our sales team!
| Peak pumping speed | 60 Hz/24 VDC: 60 L/min (3.6 m3/h) 50 Hz: 50 L/min (3.0 m3/h) |
| Media | No corrosive, explosive or particulate forming gases |
| Ultimate pressure |
3.3 x 10-1 mbar (2.5 x 10-1 Torr) |
| Max. inlet pressure | 1.0 atmosphere (0 psig) |
| Max. outlet pressure at nom voltage | 1.4 atmosphere (6.5 psig) |
| Inlet connection | NW16 |
| Exhaust connection | Female, 0.25 inch, national pipe thread (10 mm hose barb provided installed) |
| Gas ballast | Female, 0.25 inch, national pipe thread (shipped with gas ballast port plug installed; 20 µm sintered filter provided) |
| Ambient operating temperature | 5 to 40°C (41 to 104°F) |
| Storage temperature | –20 to 60°C (–4 to 140°F) |
| Motor rating | 0.16 hp (120 W) |
| Operating voltages |
100-120; 200-240 VAC, 50/60 Hz, single-phase, 3 to 6A typical |
| Motor thermal protection | Automatic thermal protection |
| Operating speed |
60 Hz/24 VDC: 3,200 rpm 50 Hz: 2,600 rpm |
| Cooling system | Air-cooled |
| Weight | Pump only: 9.5 kg (21 lbs), shipping weight: 10.5 kg (23 lbs) |
| Dimensions (H x W x L mm) | 181 x 140 x 358 |
| Leak rate (with exhaust sealed) | < 1 x 10-6 sccs (1 x 10-6 mbar.l/s) |
| Noise level | 55 dB (A) |
| Vibration level at inlet | 5 mms-1 rms |
| Hour meter | Integral hour meter provided |
| Emissions and immunity | EN 61236-1:2013 as a Class A device |
| Safety | EN/IEC 61010 3rd Edition certified |
| Materials | Body, flanges, foreline, baffle – stainless steel Jet assembly – stainless steel Body cooling coils – copper Quick cooling coil – stainless steel Cold cap – nickel-plated copper |
| Weight | 21 lbs |
| Type | Label | Description | Download |
|---|---|---|---|
|
Agilent IDP-3 - NEW | Instruction Manual | Download |
Need modifications to this item? PTB Sales' expert team of engineers can configure products to your specific needs.
Agilent IDP-3 Dry Scroll Vacuum Pump - NEW IDP3A01 single-phase, 220 V, 50/60 Hz IDP3A21 1-phase, 220-230 V, 50/60 Hz, w/ isolation valve IDP3B01 1-phase, 115 V, 60 Hz IDP3B21 1-phase, 115 V, 60 Hz, w/ isolation valve IDP3C01 1-phase, 100 V, 50/60 Hz
